Automated Reverse Seramis:Dosi vs. Budha

So, gentlemen, the third Sunday evening after casing drop 17.12.2023. Problems I faced: -Slimy solution and even foam around the pump. I changed the solution, bought a “wave maker” so that the solution would not fade out again later -My Milwaukee Ph meter finally broke down, so I returned it to the store. Then, while mixing solution, I dropped a working Chinese meter. So I was left without Ph for the whole week. -The plants were slightly burned on the lower leaves, most likely by the previous rotten solution. -The tank cap is still being pressed in, because of the sloppy Czechs, I can’t pick up the drainage mesh from the shop. In general, they are growing fine, there are 5 floors, I will top on the 6th floor, LST and will switch to flowering schedule as soon as they get over the stress. Still, because of the small box, I grow dwarfs, so I don’t need a long and massive vega. I also changed my isolation for vent, since the storage room is in the bedroom, the purchased muffler still made a little noise. I understand that with a filter the power will drop and the noise will be less, but it was just fun for me to do it myself. Result: the sound from the air flow has become much quieter, but i can hear the mechanical sound of fan (although the model is silent 25 dB), then maybe I’ll somehow modify it with mineral wool